azure.servicebus package¶

class azure.servicebus.ServiceBusMessage(body: Union[str, bytes], **kwargs: Any)[source]¶

A Service Bus Message.

Parameters

body (Union[str, bytes]) – The data to send in a single message.

Keyword Arguments

application_properties (dict) – The user defined properties on the message.
session_id (str) – The session identifier of the message for a sessionful entity.
message_id (str) – The id to identify the message.
scheduled_enqueue_time_utc (datetime.datetime) – The utc scheduled enqueue time to the message.
time_to_live (datetime.timedelta) – The life duration of a message.
content_type (str) – The content type descriptor.
correlation_id (str) – The correlation identifier.
subject (str) – The application specific subject, sometimes referred to as label.
partition_key (str) – The partition key for sending a message to a partitioned entity.
to (str) – The to address used for auto_forward chaining scenarios.
reply_to (str) – The address of an entity to send replies to.
reply_to_session_id (str) – The session identifier augmenting the reply_to address.

Variables

amqp_annotated_message (AMQPAnnotatedMessage) – Advanced use only. The internal AMQP message payload that is sent or received.

Example:

Sending a message with additional properties¶

message = ServiceBusMessage(
    "Hello World!!",
    session_id="MySessionID",
    partition_key="UsingSpecificPartition",
    user_properties={'data': 'custom_data'},
    time_to_live=datetime.timedelta(seconds=30),
    label='MyLabel'
)

property application_properties¶

The user defined properties on the message.

Return type: dict

property body¶

The body of the Message.

Return type: bytes or Iterable[bytes]

property content_type¶

The content type descriptor.

Optionally describes the payload of the message, with a descriptor following the format of RFC2045, Section 5, for example “application/json”.

Return type: str

property correlation_id¶

The correlation identifier.

Allows an application to specify a context for the message for the purposes of correlation, for example reflecting the MessageId of a message that is being replied to.

See Message Routing and Correlation in https://docs.microsoft.com/azure/service-bus-messaging/service-bus-messages-payloads?#message-routing-and-correlation.

Return type: str

property message_id¶

The id to identify the message.

The message identifier is an application-defined value that uniquely identifies the message and its payload. The identifier is a free-form string and can reflect a GUID or an identifier derived from the application context. If enabled, the duplicate detection (see https://docs.microsoft.com/azure/service-bus-messaging/duplicate-detection)

feature identifies and removes second and further submissions of messages with the same message id.

Return type: str

property partition_key¶

The partition key for sending a message to a partitioned entity.

Setting this value enables assigning related messages to the same internal partition, so that submission sequence order is correctly recorded. The partition is chosen by a hash function over this value and cannot be chosen directly.

See Partitioned queues and topics in https://docs.microsoft.com/azure/service-bus-messaging/service-bus-partitioning.

Return type: str

property reply_to¶

The address of an entity to send replies to.

This optional and application-defined value is a standard way to express a reply path to the receiver of the message. When a sender expects a reply, it sets the value to the absolute or relative path of the queue or topic it expects the reply to be sent to.

See Message Routing and Correlation in https://docs.microsoft.com/azure/service-bus-messaging/service-bus-messages-payloads?#message-routing-and-correlation.

Return type: str

property reply_to_session_id¶

The session identifier augmenting the reply_to address.

This value augments the reply_to information and specifies which session id should be set for the reply when sent to the reply entity.

See Message Routing and Correlation in https://docs.microsoft.com/azure/service-bus-messaging/service-bus-messages-payloads?#message-routing-and-correlation.

Return type: str

property scheduled_enqueue_time_utc¶

The utc scheduled enqueue time to the message.

This property can be used for scheduling when sending a message through ServiceBusSender.send method. If cancelling scheduled messages is required, you should use the ServiceBusSender.schedule method, which returns sequence numbers that can be used for future cancellation. scheduled_enqueue_time_utc is None if not set.

Return type: datetime

property session_id¶

The session identifier of the message for a sessionful entity.

For sessionful entities, this application-defined value specifies the session affiliation of the message. Messages with the same session identifier are subject to summary locking and enable exact in-order processing and demultiplexing. For non-sessionful entities, this value is ignored.

See Message Sessions in https://docs.microsoft.com/azure/service-bus-messaging/message-sessions.

Return type: str

property subject¶

The application specific subject, sometimes referred to as a label.

This property enables the application to indicate the purpose of the message to the receiver in a standardized fashion, similar to an email subject line.

Return type: str

property time_to_live¶

The life duration of a message.

This value is the relative duration after which the message expires, starting from the instant the message has been accepted and stored by the broker, as captured in enqueued_time_utc. When not set explicitly, the assumed value is the DefaultTimeToLive for the respective queue or topic. A message-level time-to-live value cannot be longer than the entity’s time-to-live setting and it is silently adjusted if it does.

See Expiration in https://docs.microsoft.com/azure/service-bus-messaging/message-expiration

Return type: timedelta

property to¶

The to address.

This property is reserved for future use in routing scenarios and presently ignored by the broker itself. Applications can use this value in rule-driven auto-forward chaining scenarios to indicate the intended logical destination of the message.

See https://docs.microsoft.com/azure/service-bus-messaging/service-bus-auto-forwarding for more details.

Return type: str

class azure.servicebus.ServiceBusMessageBatch(max_size_in_bytes: Optional[int] = None)[source]¶

A batch of messages.

Sending messages in a batch is more performant than sending individual message. ServiceBusMessageBatch helps you create the maximum allowed size batch of Message to improve sending performance.

Use the add method to add messages until the maximum batch size limit in bytes has been reached - at which point a ValueError will be raised.

Please use the create_message_batch method of ServiceBusSender to create a ServiceBusMessageBatch object instead of instantiating a ServiceBusMessageBatch object directly.

Parameters: max_size_in_bytes (int) – The maximum size of bytes data that a ServiceBusMessageBatch object can hold.

add_message(message: azure.servicebus._common.message.ServiceBusMessage) → None [source]¶

Try to add a single Message to the batch.

The total size of an added message is the sum of its body, properties, etc. If this added size results in the batch exceeding the maximum batch size, a ValueError will be raised.

Parameters

message (ServiceBusMessage) – The Message to be added to the batch.

Return type

None

Raises

class: ~azure.servicebus.exceptions.MessageContentTooLarge, when exceeding the size limit.

property max_size_in_bytes¶

The maximum size of bytes data that a ServiceBusMessageBatch object can hold.

Return type: int

property size_in_bytes¶

The combined size of the messages in the batch, in bytes.

Return type: int

class azure.servicebus.ServiceBusReceivedMessage(message: uamqp.message.Message, receive_mode: azure.servicebus._common.constants.ReceiveMode = <ReceiveMode.PeekLock: <ReceiverSettleMode.PeekLock: 1>>, **kwargs: Any)[source]¶

A Service Bus Message received from service side.

Variables: auto_renew_error (AutoLockRenewTimeout or AutoLockRenewFailed) – Error when AutoLockRenewer is used and it fails to renew the message lock.

Example:

Checking the properties on a received message.¶

    messages = servicebus_receiver.receive_messages(max_wait_time=5)
    for message in messages:
        print("Receiving: {}".format(message))
        print("Time to live: {}".format(message.time_to_live))
        print("Sequence number: {}".format(message.sequence_number))
        print("Enqueued Sequence numger: {}".format(message.enqueued_sequence_number))
        print("Partition Key: {}".format(message.partition_key))
        print("Application Properties: {}".format(message.application_properties))
        print("Delivery count: {}".format(message.delivery_count))
        print("Message ID: {}".format(message.message_id))
        print("Locked until: {}".format(message.locked_until_utc))
        print("Lock Token: {}".format(message.lock_token))
        print("Enqueued time: {}".format(message.enqueued_time_utc))

property application_properties¶

The user defined properties on the message.

Return type: dict

property body¶

The body of the Message.

Return type: bytes or Iterable[bytes]

property content_type¶

The content type descriptor.

Optionally describes the payload of the message, with a descriptor following the format of RFC2045, Section 5, for example “application/json”.

Return type: str

property correlation_id¶

The correlation identifier.

Allows an application to specify a context for the message for the purposes of correlation, for example reflecting the MessageId of a message that is being replied to.

See Message Routing and Correlation in https://docs.microsoft.com/azure/service-bus-messaging/service-bus-messages-payloads?#message-routing-and-correlation.

Return type: str

property dead_letter_error_description¶

Dead letter error description, when the message is received from a deadletter subqueue of an entity.

Return type: str

property dead_letter_reason¶

Dead letter reason, when the message is received from a deadletter subqueue of an entity.

Return type: str

property dead_letter_source¶

The name of the queue or subscription that this message was enqueued on, before it was deadlettered. This property is only set in messages that have been dead-lettered and subsequently auto-forwarded from the dead-letter queue to another entity. Indicates the entity in which the message was dead-lettered.

Return type: str

property delivery_count¶

Number of deliveries that have been attempted for this message. The count is incremented when a message lock expires or the message is explicitly abandoned by the receiver.

Return type: int

property enqueued_sequence_number¶

For messages that have been auto-forwarded, this property reflects the sequence number that had first been assigned to the message at its original point of submission.

Return type: int

property enqueued_time_utc¶

The UTC datetime at which the message has been accepted and stored in the entity.

Return type: datetime

property expires_at_utc¶

The UTC datetime at which the message is marked for removal and no longer available for retrieval from the entity due to expiration. Expiry is controlled by the Message.time_to_live property. This property is computed from Message.enqueued_time_utc + Message.time_to_live.

Return type: datetime

property lock_token¶

The lock token for the current message serving as a reference to the lock that is being held by the broker in PeekLock mode.

Return type: UUID or str

property locked_until_utc¶

The UTC datetime until which the message will be locked in the queue/subscription. When the lock expires, delivery count of hte message is incremented and the message is again available for retrieval.

Return type: datetime.datetime

property message_id¶

The id to identify the message.

The message identifier is an application-defined value that uniquely identifies the message and its payload. The identifier is a free-form string and can reflect a GUID or an identifier derived from the application context. If enabled, the duplicate detection (see https://docs.microsoft.com/azure/service-bus-messaging/duplicate-detection)

feature identifies and removes second and further submissions of messages with the same message id.

Return type: str

property partition_key¶

The partition key for sending a message to a partitioned entity.

Setting this value enables assigning related messages to the same internal partition, so that submission sequence order is correctly recorded. The partition is chosen by a hash function over this value and cannot be chosen directly.

See Partitioned queues and topics in https://docs.microsoft.com/azure/service-bus-messaging/service-bus-partitioning.

Return type: str

property reply_to¶

The address of an entity to send replies to.

This optional and application-defined value is a standard way to express a reply path to the receiver of the message. When a sender expects a reply, it sets the value to the absolute or relative path of the queue or topic it expects the reply to be sent to.

See Message Routing and Correlation in https://docs.microsoft.com/azure/service-bus-messaging/service-bus-messages-payloads?#message-routing-and-correlation.

Return type: str

property reply_to_session_id¶

The session identifier augmenting the reply_to address.

This value augments the reply_to information and specifies which session id should be set for the reply when sent to the reply entity.

See Message Routing and Correlation in https://docs.microsoft.com/azure/service-bus-messaging/service-bus-messages-payloads?#message-routing-and-correlation.

Return type: str

property scheduled_enqueue_time_utc¶

The utc scheduled enqueue time to the message.

This property can be used for scheduling when sending a message through ServiceBusSender.send method. If cancelling scheduled messages is required, you should use the ServiceBusSender.schedule method, which returns sequence numbers that can be used for future cancellation. scheduled_enqueue_time_utc is None if not set.

Return type: datetime

property sequence_number¶

The unique number assigned to a message by Service Bus. The sequence number is a unique 64-bit integer assigned to a message as it is accepted and stored by the broker and functions as its true identifier. For partitioned entities, the topmost 16 bits reflect the partition identifier. Sequence numbers monotonically increase. They roll over to 0 when the 48-64 bit range is exhausted.

Return type: int

property session_id¶

The session identifier of the message for a sessionful entity.

For sessionful entities, this application-defined value specifies the session affiliation of the message. Messages with the same session identifier are subject to summary locking and enable exact in-order processing and demultiplexing. For non-sessionful entities, this value is ignored.

See Message Sessions in https://docs.microsoft.com/azure/service-bus-messaging/message-sessions.

Return type: str

property subject¶

The application specific subject, sometimes referred to as a label.

This property enables the application to indicate the purpose of the message to the receiver in a standardized fashion, similar to an email subject line.

Return type: str

property time_to_live¶

The life duration of a message.

This value is the relative duration after which the message expires, starting from the instant the message has been accepted and stored by the broker, as captured in enqueued_time_utc. When not set explicitly, the assumed value is the DefaultTimeToLive for the respective queue or topic. A message-level time-to-live value cannot be longer than the entity’s time-to-live setting and it is silently adjusted if it does.

See Expiration in https://docs.microsoft.com/azure/service-bus-messaging/message-expiration

Return type: timedelta

property to¶

The to address.

This property is reserved for future use in routing scenarios and presently ignored by the broker itself. Applications can use this value in rule-driven auto-forward chaining scenarios to indicate the intended logical destination of the message.

See https://docs.microsoft.com/azure/service-bus-messaging/service-bus-auto-forwarding for more details.

Return type: str

class azure.servicebus.SubQueue[source]¶

An enumeration.

DeadLetter = 1¶

TransferDeadLetter = 2¶

class azure.servicebus.ReceiveMode[source]¶

An enumeration.

PeekLock = <ReceiverSettleMode.PeekLock: 1>¶

ReceiveAndDelete = <ReceiverSettleMode.ReceiveAndDelete: 0>¶

class azure.servicebus.ServiceBusClient(fully_qualified_namespace: str, credential: TokenCredential, **kwargs: Any)[source]¶

The ServiceBusClient class defines a high level interface for getting ServiceBusSender and ServiceBusReceiver.

Variables

fully_qualified_namespace (str) – The fully qualified host name for the Service Bus namespace. The namespace format is: <yournamespace>.servicebus.windows.net.

Parameters

fully_qualified_namespace (str) – The fully qualified host name for the Service Bus namespace. The namespace format is: <yournamespace>.servicebus.windows.net.
credential (TokenCredential) – The credential object used for authentication which implements a particular interface for getting tokens. It accepts credential objects generated by the azure-identity library and objects that implement the get_token(self, *scopes) method.

Keyword Arguments

logging_enable (bool) – Whether to output network trace logs to the logger. Default is False.
transport_type (TransportType) – The type of transport protocol that will be used for communicating with the Service Bus service. Default is TransportType.Amqp.
http_proxy (dict) – HTTP proxy settings. This must be a dictionary with the following keys: ‘proxy_hostname’ (str value) and ‘proxy_port’ (int value). Additionally the following keys may also be present: ‘username’, ‘password’.
user_agent (str) – If specified, this will be added in front of the built-in user agent string.
retry_total (int) – The total number of attempts to redo a failed operation when an error occurs. Default value is 3.
retry_backoff_factor (float) – Delta back-off internal in the unit of second between retries. Default value is 0.8.
retry_backoff_max (float) – Maximum back-off interval in the unit of second. Default value is 120.

Example:

Create a new instance of the ServiceBusClient.¶

import os
from azure.servicebus import ServiceBusClient, ServiceBusSharedKeyCredential
fully_qualified_namespace = os.environ['SERVICE_BUS_FULLY_QUALIFIED_NAMESPACE']
shared_access_policy = os.environ['SERVICE_BUS_SAS_POLICY']
shared_access_key = os.environ['SERVICE_BUS_SAS_KEY']
servicebus_client = ServiceBusClient(
    fully_qualified_namespace=fully_qualified_namespace,
    credential=ServiceBusSharedKeyCredential(
        shared_access_policy,
        shared_access_key
    )
)

close() → None [source]¶

Close down the ServiceBus client. All spawned senders, receivers and underlying connection will be shutdown.

Returns: None

classmethod from_connection_string(conn_str: str, **kwargs: Any) → azure.servicebus._servicebus_client.ServiceBusClient[source]¶

Create a ServiceBusClient from a connection string.

Parameters

conn_str (str) – The connection string of a Service Bus.

Keyword Arguments

logging_enable (bool) – Whether to output network trace logs to the logger. Default is False.
transport_type (TransportType) – The type of transport protocol that will be used for communicating with the Service Bus service. Default is TransportType.Amqp.
http_proxy (dict) – HTTP proxy settings. This must be a dictionary with the following keys: ‘proxy_hostname’ (str value) and ‘proxy_port’ (int value). Additionally the following keys may also be present: ‘username’, ‘password’.
user_agent (str) – If specified, this will be added in front of the built-in user agent string.
retry_total (int) – The total number of attempts to redo a failed operation when an error occurs. Default value is 3.
retry_backoff_factor (float) – Delta back-off internal in the unit of second between retries. Default value is 0.8.
retry_backoff_max (float) – Maximum back-off interval in the unit of second. Default value is 120.

Return type

ServiceBusClient

Example:

Create a new instance of the ServiceBusClient from connection string.¶

import os
from azure.servicebus import ServiceBusClient
servicebus_connection_str = os.environ['SERVICE_BUS_CONNECTION_STR']
servicebus_client = ServiceBusClient.from_connection_string(conn_str=servicebus_connection_str)

get_queue_receiver(queue_name: str, **kwargs: Any) → azure.servicebus._servicebus_receiver.ServiceBusReceiver[source]¶

Get ServiceBusReceiver for the specific queue.

Parameters

queue_name (str) – The path of specific Service Bus Queue the client connects to.

Keyword Arguments

session_id (Union[str, NEXT_AVAILABLE_SESSION]) – A specific session from which to receive. This must be specified for a sessionful queue, otherwise it must be None. In order to receive messages from the next available session, set this to ~azure.servicebus.NEXT_AVAILABLE_SESSION.
sub_queue (Optional[SubQueue]) – If specified, the subqueue this receiver will connect to. This includes the DeadLetter and TransferDeadLetter queues, holds messages that can’t be delivered to any receiver or messages that can’t be processed. The default is None, meaning connect to the primary queue.
receive_mode (ReceiveMode) – The receive_mode with which messages will be retrieved from the entity. The two options are PeekLock and ReceiveAndDelete. Messages received with PeekLock must be settled within a given lock period before they will be removed from the queue. Messages received with ReceiveAndDelete will be immediately removed from the queue, and cannot be subsequently rejected or re-received if the client fails to process the message. The default receive_mode is PeekLock.
max_wait_time (Optional[float]) – The timeout in seconds between received messages after which the receiver will automatically stop receiving. The default value is None, meaning no timeout.
auto_lock_renewer (Optional[AutoLockRenewer]) – An AutoLockRenewer can be provided such that messages are automatically registered on receipt. If the receiver is a session receiver, it will apply to the session instead.
prefetch_count (int) – The maximum number of messages to cache with each request to the service. This setting is only for advanced performance tuning. Increasing this value will improve message throughput performance but increase the chance that messages will expire while they are cached if they’re not processed fast enough. The default value is 0, meaning messages will be received from the service and processed one at a time. In the case of prefetch_count being 0, ServiceBusReceiver.receive would try to cache max_message_count (if provided) within its request to the service.

Return type

ServiceBusReceiver

Example:

Create a new instance of the ServiceBusReceiver from ServiceBusClient.¶

import os
from azure.servicebus import ServiceBusClient
servicebus_connection_str = os.environ['SERVICE_BUS_CONNECTION_STR']
queue_name = os.environ['SERVICE_BUS_QUEUE_NAME']
servicebus_client = ServiceBusClient.from_connection_string(conn_str=servicebus_connection_str)
with servicebus_client:
    queue_receiver = servicebus_client.get_queue_receiver(queue_name=queue_name)

get_queue_sender(queue_name: str, **kwargs: Any) → azure.servicebus._servicebus_sender.ServiceBusSender[source]¶

Get ServiceBusSender for the specific queue.

Parameters: queue_name (str) – The path of specific Service Bus Queue the client connects to.
Return type: ServiceBusSender

Example:

Create a new instance of the ServiceBusSender from ServiceBusClient.¶

import os
from azure.servicebus import ServiceBusClient
servicebus_connection_str = os.environ['SERVICE_BUS_CONNECTION_STR']
queue_name = os.environ['SERVICE_BUS_QUEUE_NAME']
servicebus_client = ServiceBusClient.from_connection_string(conn_str=servicebus_connection_str)
with servicebus_client:
    queue_sender = servicebus_client.get_queue_sender(queue_name=queue_name)

get_subscription_receiver(topic_name: str, subscription_name: str, **kwargs: Any) → azure.servicebus._servicebus_receiver.ServiceBusReceiver[source]¶

Get ServiceBusReceiver for the specific subscription under the topic.

Parameters

topic_name (str) – The name of specific Service Bus Topic the client connects to.
subscription_name (str) – The name of specific Service Bus Subscription under the given Service Bus Topic.

Keyword Arguments

session_id (Union[str, NEXT_AVAILABLE_SESSION]) – A specific session from which to receive. This must be specified for a sessionful subscription, otherwise it must be None. In order to receive messages from the next available session, set this to ~azure.servicebus.NEXT_AVAILABLE_SESSION.
sub_queue (Optional[SubQueue]) – If specified, the subqueue this receiver will connect to. This includes the DeadLetter and TransferDeadLetter queues, holds messages that can’t be delivered to any receiver or messages that can’t be processed. The default is None, meaning connect to the primary queue.
receive_mode (ReceiveMode) – The receive_mode with which messages will be retrieved from the entity. The two options are PeekLock and ReceiveAndDelete. Messages received with PeekLock must be settled within a given lock period before they will be removed from the subscription. Messages received with ReceiveAndDelete will be immediately removed from the subscription, and cannot be subsequently rejected or re-received if the client fails to process the message. The default receive_mode is PeekLock.
max_wait_time (Optional[float]) – The timeout in seconds between received messages after which the receiver will automatically stop receiving. The default value is None, meaning no timeout.
auto_lock_renewer (Optional[AutoLockRenewer]) – An AutoLockRenewer can be provided such that messages are automatically registered on receipt. If the receiver is a session receiver, it will apply to the session instead.
prefetch_count (int) – The maximum number of messages to cache with each request to the service. This setting is only for advanced performance tuning. Increasing this value will improve message throughput performance but increase the chance that messages will expire while they are cached if they’re not processed fast enough. The default value is 0, meaning messages will be received from the service and processed one at a time. In the case of prefetch_count being 0, ServiceBusReceiver.receive would try to cache max_message_count (if provided) within its request to the service.

Return type

ServiceBusReceiver

Example:

Create a new instance of the ServiceBusReceiver from ServiceBusClient.¶

import os
from azure.servicebus import ServiceBusClient
servicebus_connection_str = os.environ['SERVICE_BUS_CONNECTION_STR']
topic_name = os.environ["SERVICE_BUS_TOPIC_NAME"]
subscription_name = os.environ["SERVICE_BUS_SUBSCRIPTION_NAME"]
servicebus_client = ServiceBusClient.from_connection_string(conn_str=servicebus_connection_str)
with servicebus_client:
    subscription_receiver = servicebus_client.get_subscription_receiver(
        topic_name=topic_name,
        subscription_name=subscription_name,
    )

get_topic_sender(topic_name: str, **kwargs: Any) → azure.servicebus._servicebus_sender.ServiceBusSender[source]¶

Get ServiceBusSender for the specific topic.

Parameters: topic_name (str) – The path of specific Service Bus Topic the client connects to.
Return type: ServiceBusSender

Example:

Create a new instance of the ServiceBusSender from ServiceBusClient.¶

import os
from azure.servicebus import ServiceBusClient
servicebus_connection_str = os.environ['SERVICE_BUS_CONNECTION_STR']
topic_name = os.environ['SERVICE_BUS_TOPIC_NAME']
servicebus_client = ServiceBusClient.from_connection_string(conn_str=servicebus_connection_str)
with servicebus_client:
    topic_sender = servicebus_client.get_topic_sender(topic_name=topic_name)

class azure.servicebus.ServiceBusReceiver(fully_qualified_namespace: str, credential: TokenCredential, **kwargs: Any)[source]¶

The ServiceBusReceiver class defines a high level interface for receiving messages from the Azure Service Bus Queue or Topic Subscription.

The two primary channels for message receipt are receive() to make a single request for messages, and for message in receiver: to continuously receive incoming messages in an ongoing fashion.

Variables

fully_qualified_namespace (str) – The fully qualified host name for the Service Bus namespace. The namespace format is: <yournamespace>.servicebus.windows.net.
entity_path (str) – The path of the entity that the client connects to.

Parameters

fully_qualified_namespace (str) – The fully qualified host name for the Service Bus namespace. The namespace format is: <yournamespace>.servicebus.windows.net.
credential (TokenCredential) – The credential object used for authentication which implements a particular interface for getting tokens. It accepts :class: credential objects generated by the azure-identity library and objects that implement the get_token(self, *scopes) method.

Keyword Arguments

queue_name (str) – The path of specific Service Bus Queue the client connects to.
topic_name (str) – The path of specific Service Bus Topic which contains the Subscription the client connects to.
subscription_name (str) – The path of specific Service Bus Subscription under the specified Topic the client connects to.
max_wait_time (Optional[float]) – The timeout in seconds between received messages after which the receiver will automatically stop receiving. The default value is None, meaning no timeout.
receive_mode (ReceiveMode) – The mode with which messages will be retrieved from the entity. The two options are PeekLock and ReceiveAndDelete. Messages received with PeekLock must be settled within a given lock period before they will be removed from the queue. Messages received with ReceiveAndDelete will be immediately removed from the queue, and cannot be subsequently abandoned or re-received if the client fails to process the message. The default mode is PeekLock.
logging_enable (bool) – Whether to output network trace logs to the logger. Default is False.
transport_type (TransportType) – The type of transport protocol that will be used for communicating with the Service Bus service. Default is TransportType.Amqp.
http_proxy (dict) – HTTP proxy settings. This must be a dictionary with the following keys: ‘proxy_hostname’ (str value) and ‘proxy_port’ (int value). Additionally the following keys may also be present: ‘username’, ‘password’.
user_agent (str) – If specified, this will be added in front of the built-in user agent string.
auto_lock_renewer (Optional[AutoLockRenewer]) – An AutoLockRenewer can be provided such that messages are automatically registered on receipt. If the receiver is a session receiver, it will apply to the session instead.
prefetch_count (int) – The maximum number of messages to cache with each request to the service. This setting is only for advanced performance tuning. Increasing this value will improve message throughput performance but increase the chance that messages will expire while they are cached if they’re not processed fast enough. The default value is 0, meaning messages will be received from the service and processed one at a time. In the case of prefetch_count being 0, ServiceBusReceiver.receive would try to cache max_message_count (if provided) within its request to the service.

Example:

Create a new instance of the ServiceBusReceiver.¶

import os
from azure.servicebus import ServiceBusReceiver, ServiceBusSharedKeyCredential
fully_qualified_namespace = os.environ['SERVICE_BUS_FULLY_QUALIFIED_NAMESPACE']
shared_access_policy = os.environ['SERVICE_BUS_SAS_POLICY']
shared_access_key = os.environ['SERVICE_BUS_SAS_KEY']
queue_name = os.environ['SERVICE_BUS_QUEUE_NAME']
queue_receiver = ServiceBusReceiver(
    fully_qualified_namespace=fully_qualified_namespace,
    credential=ServiceBusSharedKeyCredential(
        shared_access_policy,
        shared_access_key
    ),
    queue_name=queue_name
)

abandon_message(message)[source]¶

Abandon the message.

This message will be returned to the queue and made available to be received again.

Parameters: message (ServiceBusReceivedMessage) – The received message to be abandoned.
Return type: None
Raises: ~azure.servicebus.exceptions.MessageAlreadySettled if the message has been settled.
Raises: ~azure.servicebus.exceptions.MessageLockExpired if message lock has already expired.
Raises: ~azure.servicebus.exceptions.MessageSettleFailed if message settle operation fails.

close() → None [source]¶

Close down the handler links (and connection if the handler uses a separate connection).

If the handler has already closed, this operation will do nothing.

Return type: None

complete_message(message)[source]¶

Complete the message.

This removes the message from the queue.

Parameters: message (ServiceBusReceivedMessage) – The received message to be completed.
Return type: None
Raises: ~azure.servicebus.exceptions.MessageAlreadySettled if the message has been settled.
Raises: ~azure.servicebus.exceptions.MessageLockExpired if message lock has already expired.
Raises: ~azure.servicebus.exceptions.MessageSettleFailed if message settle operation fails.

dead_letter_message(message, reason=None, error_description=None)[source]¶

Move the message to the Dead Letter queue.

The Dead Letter queue is a sub-queue that can be used to store messages that failed to process correctly, or otherwise require further inspection or processing. The queue can also be configured to send expired messages to the Dead Letter queue.

Parameters

message (ServiceBusReceivedMessage) – The received message to be dead-lettered.
reason (Optional[str]) – The reason for dead-lettering the message.
error_description (Optional[str]) – The detailed error description for dead-lettering the message.

Return type

None

Raises

~azure.servicebus.exceptions.MessageAlreadySettled if the message has been settled.

Raises

~azure.servicebus.exceptions.MessageLockExpired if message lock has already expired.

Raises

~azure.servicebus.exceptions.MessageSettleFailed if message settle operation fails.

defer_message(message)[source]¶

Defers the message.

This message will remain in the queue but must be requested specifically by its sequence number in order to be received.

Parameters: message (ServiceBusReceivedMessage) – The received message to be deferred.
Return type: None
Raises: ~azure.servicebus.exceptions.MessageAlreadySettled if the message has been settled.
Raises: ~azure.servicebus.exceptions.MessageLockExpired if message lock has already expired.
Raises: ~azure.servicebus.exceptions.MessageSettleFailed if message settle operation fails.

get_streaming_message_iter(max_wait_time: Optional[float] = None) → Iterator[azure.servicebus._common.message.ServiceBusReceivedMessage][source]¶

Receive messages from an iterator indefinitely, or if a max_wait_time is specified, until such a timeout occurs.

Parameters: max_wait_time (Optional[float]) – Maximum time to wait in seconds for the next message to arrive. If no messages arrive, and no timeout is specified, this call will not return until the connection is closed. If specified, and no messages arrive for the timeout period, the iterator will stop.
Return type: Iterator[ServiceBusReceivedMessage]

Example:

Receive indefinitely from an iterator in streaming fashion.¶

with servicebus_receiver:
    for message in servicebus_receiver.get_streaming_message_iter():
        print(str(message))
        servicebus_receiver.complete_message(message)

next()¶

peek_messages(max_message_count: int = 1, **kwargs: Any) → List[azure.servicebus._common.message.ServiceBusReceivedMessage][source]¶

Browse messages currently pending in the queue.

Peeked messages are not removed from queue, nor are they locked. They cannot be completed, deferred or dead-lettered.

Parameters

max_message_count (int) – The maximum number of messages to try and peek. The default value is 1.

Keyword Arguments

sequence_number (int) – A message sequence number from which to start browsing messages.
timeout (float) – The total operation timeout in seconds including all the retries. The value must be greater than 0 if specified. The default value is None, meaning no timeout.

Return type

List[ServiceBusReceivedMessage]

Example:

Look at pending messages in the queue.¶

with servicebus_receiver:
    messages = servicebus_receiver.peek_messages()
    for message in messages:
        print(str(message))

receive_deferred_messages(sequence_numbers: Union[int, List[int]], **kwargs: Any) → List[azure.servicebus._common.message.ServiceBusReceivedMessage][source]¶

Receive messages that have previously been deferred.

When receiving deferred messages from a partitioned entity, all of the supplied sequence numbers must be messages from the same partition.

Parameters: sequence_numbers (Union[int,List[int]]) – A list of the sequence numbers of messages that have been deferred.
Keyword Arguments: timeout (float) – The total operation timeout in seconds including all the retries. The value must be greater than 0 if specified. The default value is None, meaning no timeout.
Return type: List[ServiceBusReceivedMessage]

Example:

Receive deferred messages from ServiceBus.¶

with servicebus_receiver:
    deferred_sequenced_numbers = []
    messages = servicebus_receiver.receive_messages(max_wait_time=5)
    for message in messages:
        deferred_sequenced_numbers.append(message.sequence_number)
        print(str(message))
        servicebus_receiver.defer_message(message)

    received_deferred_msg = servicebus_receiver.receive_deferred_messages(
        sequence_numbers=deferred_sequenced_numbers
    )

    for msg in received_deferred_msg:
        servicebus_receiver.complete_message(msg)

receive_messages(max_message_count: Optional[int] = 1, max_wait_time: Optional[float] = None) → List[azure.servicebus._common.message.ServiceBusReceivedMessage][source]¶

Receive a batch of messages at once.

This approach is optimal if you wish to process multiple messages simultaneously, or perform an ad-hoc receive as a single call.

Note that the number of messages retrieved in a single batch will be dependent on whether prefetch_count was set for the receiver. If prefetch_count is not set for the receiver, the receiver would try to cache max_message_count (if provided) messages within the request to the service.

This call will prioritize returning quickly over meeting a specified batch size, and so will return as soon as at least one message is received and there is a gap in incoming messages regardless of the specified batch size.

Parameters

max_message_count (Optional[int]) – Maximum number of messages in the batch. Actual number returned will depend on prefetch_count and incoming stream rate. Setting to None will fully depend on the prefetch config. The default value is 1.
max_wait_time (Optional[float]) – Maximum time to wait in seconds for the first message to arrive. If no messages arrive, and no timeout is specified, this call will not return until the connection is closed. If specified, an no messages arrive within the timeout period, an empty list will be returned.

Return type

List[ServiceBusReceivedMessage]

Example:

Receive messages from ServiceBus.¶

with servicebus_receiver:
    messages = servicebus_receiver.receive_messages(max_wait_time=5)
    for message in messages:
        print(str(message))
        servicebus_receiver.complete_message(message)

renew_message_lock(message: ServiceBusReceivedMessage, **kwargs: Any) → datetime.datetime [source]¶

Renew the message lock.

This will maintain the lock on the message to ensure it is not returned to the queue to be reprocessed.

In order to complete (or otherwise settle) the message, the lock must be maintained, and cannot already have expired; an expired lock cannot be renewed.

Messages received via ReceiveAndDelete mode are not locked, and therefore cannot be renewed. This operation is only available for non-sessionful messages as well.

Parameters: message (ServiceBusReceivedMessage) – The message to renew the lock for.
Keyword Arguments: timeout (float) – The total operation timeout in seconds including all the retries. The value must be greater than 0 if specified. The default value is None, meaning no timeout.
Returns: The utc datetime the lock is set to expire at.
Return type: datetime.datetime
Raises: TypeError if the message is sessionful.
Raises: ~azure.servicebus.exceptions.MessageLockExpired is message lock has already expired.
Raises: ~azure.servicebus.exceptions.MessageAlreadySettled is message has already been settled.

property session¶

Get the ServiceBusSession object linked with the receiver. Session is only available to session-enabled entities, it would return None if called on a non-sessionful receiver.

Return type: ServiceBusSession

Example:

Get session from a receiver¶

    with servicebus_client.get_queue_receiver(queue_name=queue_name, session_id=session_id) as receiver:
        session = receiver.session

class azure.servicebus.ServiceBusSession(session_id: str, receiver: Union[ServiceBusReceiver, ServiceBusReceiverAsync])[source]¶

The ServiceBusSession is used for manage session states and lock renewal.

Please use the instance variable `session` on the ServiceBusReceiver to get the corresponding ServiceBusSession object linked with the receiver instead of instantiating a ServiceBusSession object directly.

Variables: auto_renew_error (AutoLockRenewTimeout or AutoLockRenewFailed) – Error when AutoLockRenewer is used and it fails to renew the session lock.

Example:

Get session from a receiver¶

    with servicebus_client.get_queue_receiver(queue_name=queue_name, session_id=session_id) as receiver:
        session = receiver.session

get_state(**kwargs: Any) → bytes [source]¶

Get the session state.

Returns None if no state has been set.

Keyword Arguments: timeout (float) – The total operation timeout in seconds including all the retries. The value must be greater than 0 if specified. The default value is None, meaning no timeout.
Return type: str

Example:

Get the session state¶

    with servicebus_client.get_queue_receiver(queue_name=queue_name, session_id=session_id) as receiver:
        session = receiver.session
        session_state = session.get_state()

renew_lock(**kwargs: Any) → datetime.datetime [source]¶

Renew the session lock.

This operation must be performed periodically in order to retain a lock on the session to continue message processing.

Once the lock is lost the connection will be closed; an expired lock cannot be renewed.

This operation can also be performed as a threaded background task by registering the session with an azure.servicebus.AutoLockRenewer instance.

Keyword Arguments: timeout (float) – The total operation timeout in seconds including all the retries. The value must be greater than 0 if specified. The default value is None, meaning no timeout.
Returns: The utc datetime the lock is set to expire at.
Return type: datetime.datetime

Example:

Renew the session lock before it expires¶

    with servicebus_client.get_queue_receiver(queue_name=queue_name, session_id=session_id) as receiver:
        session = receiver.session
        session_state = session.renew_lock()

set_state(state: Union[str, bytes, bytearray], **kwargs: Any) → None [source]¶

Set the session state.

Parameters: state (Union[str, bytes, bytearray]) – The state value.
Keyword Arguments: timeout (float) – The total operation timeout in seconds including all the retries. The value must be greater than 0 if specified. The default value is None, meaning no timeout.

Example:

Set the session state¶

    with servicebus_client.get_queue_receiver(queue_name=queue_name, session_id=session_id) as receiver:
        session = receiver.session
        session_state = session.set_state("START")

property locked_until_utc¶

The time at which this session’s lock will expire.

Return type: datetime.datetime

property session_id¶

Session id of the current session.

Return type: str

class azure.servicebus.ServiceBusSender(fully_qualified_namespace: str, credential: TokenCredential, **kwargs: Any)[source]¶

The ServiceBusSender class defines a high level interface for sending messages to the Azure Service Bus Queue or Topic.

Variables

fully_qualified_namespace (str) – The fully qualified host name for the Service Bus namespace. The namespace format is: <yournamespace>.servicebus.windows.net.
entity_name (str) – The name of the entity that the client connects to.

Parameters

fully_qualified_namespace (str) – The fully qualified host name for the Service Bus namespace. The namespace format is: <yournamespace>.servicebus.windows.net.
credential (TokenCredential) – The credential object used for authentication which implements a particular interface for getting tokens. It accepts :class: credential objects generated by the azure-identity library and objects that implement the get_token(self, *scopes) method.

Keyword Arguments

queue_name (str) – The path of specific Service Bus Queue the client connects to.
topic_name (str) – The path of specific Service Bus Topic the client connects to.
logging_enable (bool) – Whether to output network trace logs to the logger. Default is False.
transport_type (TransportType) – The type of transport protocol that will be used for communicating with the Service Bus service. Default is TransportType.Amqp.
http_proxy (dict) – HTTP proxy settings. This must be a dictionary with the following keys: ‘proxy_hostname’ (str value) and ‘proxy_port’ (int value). Additionally the following keys may also be present: ‘username’, ‘password’.
user_agent (str) – If specified, this will be added in front of the built-in user agent string.

Example:

Create a new instance of the ServiceBusSender.¶

import os
from azure.servicebus import ServiceBusSender, ServiceBusSharedKeyCredential
fully_qualified_namespace = os.environ['SERVICE_BUS_FULLY_QUALIFIED_NAMESPACE']
shared_access_policy = os.environ['SERVICE_BUS_SAS_POLICY']
shared_access_key = os.environ['SERVICE_BUS_SAS_KEY']
queue_name = os.environ['SERVICE_BUS_QUEUE_NAME']
queue_sender = ServiceBusSender(
    fully_qualified_namespace=fully_qualified_namespace,
    credential=ServiceBusSharedKeyCredential(
        shared_access_policy,
        shared_access_key
    ),
    queue_name=queue_name
)

cancel_scheduled_messages(sequence_numbers: Union[int, List[int]], **kwargs: Any) → None [source]¶

Cancel one or more messages that have previously been scheduled and are still pending.

Parameters: sequence_numbers (int or list[int]) – The sequence numbers of the scheduled messages.
Keyword Arguments: timeout (float) – The total operation timeout in seconds including all the retries. The value must be greater than 0 if specified. The default value is None, meaning no timeout.
Return type: None
Raises: ~azure.servicebus.exceptions.ServiceBusError if messages cancellation failed due to message already cancelled or enqueued.

Example:

Cancelling messages scheduled to be sent in future¶

with servicebus_sender:
    servicebus_sender.cancel_scheduled_messages(sequence_nums)

close() → None ¶

Close down the handler links (and connection if the handler uses a separate connection).

If the handler has already closed, this operation will do nothing.

Return type: None

create_message_batch(max_size_in_bytes: Optional[int] = None) → azure.servicebus._common.message.ServiceBusMessageBatch[source]¶

Create a ServiceBusMessageBatch object with the max size of all content being constrained by max_size_in_bytes. The max_size should be no greater than the max allowed message size defined by the service.

Parameters: max_size_in_bytes (int) – The maximum size of bytes data that a ServiceBusMessageBatch object can hold. By default, the value is determined by your Service Bus tier.
Return type: ServiceBusMessageBatch

Example:

Create ServiceBusMessageBatch object within limited size¶

with servicebus_sender:
    batch_message = servicebus_sender.create_message_batch()
    batch_message.add_message(ServiceBusMessage("Single message inside batch"))

schedule_messages(messages: Union[ServiceBusMessage, List[ServiceBusMessage]], schedule_time_utc: datetime.datetime, **kwargs: Any) → List[int][source]¶

Send Message or multiple Messages to be enqueued at a specific time. Returns a list of the sequence numbers of the enqueued messages. :param messages: The message or list of messages to schedule. :type messages: Union[~azure.servicebus.ServiceBusMessage, List[~azure.servicebus.ServiceBusMessage]] :param schedule_time_utc: The utc date and time to enqueue the messages. :type schedule_time_utc: ~datetime.datetime :keyword float timeout: The total operation timeout in seconds including all the retries. The value must be

greater than 0 if specified. The default value is None, meaning no timeout.

Return type: List[int]

Example:

Schedule a message to be sent in future¶

with servicebus_sender:
    scheduled_time_utc = datetime.datetime.utcnow() + datetime.timedelta(seconds=30)
    scheduled_messages = [ServiceBusMessage("Scheduled message") for _ in range(10)]
    sequence_nums = servicebus_sender.schedule_messages(scheduled_messages, scheduled_time_utc)

send_messages(message: Union[azure.servicebus._common.message.ServiceBusMessage, azure.servicebus._common.message.ServiceBusMessageBatch, List[azure.servicebus._common.message.ServiceBusMessage]], **kwargs: Any) → None [source]¶

Sends message and blocks until acknowledgement is received or operation times out.

If a list of messages was provided, attempts to send them as a single batch, throwing a ValueError if they cannot fit in a single batch.

Parameters

message (Union[ServiceBusMessage,ServiceBusMessageBatch, list[ServiceBusMessage]]) – The ServiceBus message to be sent.

Keyword Arguments

timeout (float) – The total operation timeout in seconds including all the retries. The value must be greater than 0 if specified. The default value is None, meaning no timeout.

Return type

None

Raises

class: ~azure.servicebus.exceptions.OperationTimeoutError if sending times out.
class: ~azure.servicebus.exceptions.MessageContentTooLarge if the size of the message is over service bus frame size limit.
class: ~azure.servicebus.exceptions.MessageSendFailed if the message fails to send
class: ~azure.servicebus.exceptions.ServiceBusError when other errors happen such as connection error, authentication error, and any unexpected errors. It’s also the top-level root class of above errors.

Example:

Send message.¶

with servicebus_sender:
    message = ServiceBusMessage("Hello World")
    servicebus_sender.send_messages(message)

class azure.servicebus.TransportType[source]¶

Transport type The underlying transport protocol type:

Amqp: AMQP over the default TCP transport protocol, it uses port 5671. AmqpOverWebsocket: Amqp over the Web Sockets transport protocol, it uses port 443.

Amqp = 1¶

AmqpOverWebsocket = 2¶

class azure.servicebus.AutoLockRenewer(max_lock_renewal_duration: float = 300, on_lock_renew_failure: Optional[LockRenewFailureCallback] = None, executor: ThreadPoolExecutor = None, max_workers: int = None)[source]¶

Auto renew locks for messages and sessions using a background thread pool.

Parameters

max_lock_renewal_duration (float) – A time in seconds that locks registered to this renewer should be maintained for. Default value is 300 (5 minutes).
on_lock_renew_failure (Optional[LockRenewFailureCallback]) – A callback may be specified to be called when the lock is lost on the renewable that is being registered. Default value is None (no callback).
executor (ThreadPoolExecutor) – A user-specified thread pool. This cannot be combined with setting max_workers.
max_workers (int) – Specify the maximum workers in the thread pool. If not specified the number used will be derived from the core count of the environment. This cannot be combined with executor.

Example:

Automatically renew a message lock¶

from azure.servicebus import AutoLockRenewer
lock_renewal = AutoLockRenewer(max_workers=4)
with servicebus_receiver:
    for message in servicebus_receiver:
        # Auto renew message for 1 minute.
        lock_renewal.register(servicebus_receiver, message, max_lock_renewal_duration=60)
        process_message(message)
        servicebus_receiver.complete_message(message)

Automatically renew a session lock¶

    from azure.servicebus import AutoLockRenewer

    lock_renewal = AutoLockRenewer(max_workers=4)
    with servicebus_client.get_queue_receiver(queue_name=queue_name, session_id=session_id) as receiver:
        session = receiver.session
        # Auto renew session lock for 2 minutes
        lock_renewal.register(receiver, session, max_lock_renewal_duration=120)
        for message in receiver:
            process_message(message)
            receiver.complete_message(message)

Auto renew locks for messages and sessions using a background thread pool.

Parameters

max_lock_renewal_duration (float) – A time in seconds that locks registered to this renewer should be maintained for. Default value is 300 (5 minutes).
on_lock_renew_failure (Optional[LockRenewFailureCallback]) – A callback may be specified to be called when the lock is lost on the renewable that is being registered. Default value is None (no callback).
executor (ThreadPoolExecutor) – A user-specified thread pool. This cannot be combined with setting max_workers.
max_workers (int) – Specify the maximum workers in the thread pool. If not specified the number used will be derived from the core count of the environment. This cannot be combined with executor.

close(wait=True)[source]¶

Cease autorenewal by shutting down the thread pool to clean up any remaining lock renewal threads.

Parameters: wait (bool) – Whether to block until thread pool has shutdown. Default is True.
Return type: None

register(receiver: ServiceBusReceiver, renewable: Renewable, max_lock_renewal_duration: Optional[float] = None, on_lock_renew_failure: Optional[LockRenewFailureCallback] = None) → None [source]¶

Register a renewable entity for automatic lock renewal.

Parameters

receiver (ServiceBusReceiver) – The ServiceBusReceiver instance that is associated with the message or the session to be auto-lock-renewed.
renewable (Union[ServiceBusReceivedMessage, ServiceBusSession]) – A locked entity that needs to be renewed.
max_lock_renewal_duration (Optional[float]) – A time in seconds that the lock should be maintained for. Default value is 300 (5 minutes).
on_lock_renew_failure (Optional[LockRenewFailureCallback]) – A callback may be specified to be called when the lock is lost on the renewable that is being registered. Default value is None (no callback).

Return type

None

class azure.servicebus.ServiceBusConnectionStringProperties(**kwargs)[source]¶

Properties of a connection string.

get(key: Any, default: Optional[Any] = None) → Any¶

has_key(k: Any) → bool ¶

items() → list ¶

keys() → list ¶

update(*args: Any, **kwargs: Any) → None ¶

values() → list ¶

property endpoint¶

//<FQDN>/

Type: The endpoint for the Service Bus resource. In the format sb

property entity_path¶: Optional. Represents the name of the queue/topic.

property fully_qualified_namespace¶: The fully qualified host name for the Service Bus namespace. The namespace format is: <yournamespace>.servicebus.windows.net.

property shared_access_key¶: The shared_access_key can be used along with the shared_access_key_name as a credential.

property shared_access_key_name¶: The name of the shared_access_key. This must be used along with the shared_access_key.

property shared_access_signature¶: This can be provided instead of the shared_access_key_name and the shared_access_key.

azure.servicebus.parse_connection_string(conn_str)[source]¶

Parse the connection string into a properties bag containing its component parts.

Parameters: conn_str (str) – The connection string that has to be parsed.
Return type: ServiceBusConnectionStringProperties

Subpackages¶

Submodules¶

azure.servicebus.exceptions module¶

exception azure.servicebus.exceptions.AutoLockRenewFailed(message, *args, **kwargs)[source]¶

An attempt to renew a lock on a message or session in the background has failed.

raise_with_traceback()¶

with_traceback()¶: Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

args¶

exception azure.servicebus.exceptions.AutoLockRenewTimeout(message, *args, **kwargs)[source]¶

The time allocated to renew the message or session lock has elapsed.

raise_with_traceback()¶

with_traceback()¶: Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

args¶

exception azure.servicebus.exceptions.MessageAlreadySettled(action: str)[source]¶

Failed to settle the message.

An attempt was made to complete an operation on a message that has already been settled (completed, abandoned, dead-lettered or deferred). This error will also be raised if an attempt is made to settle a message received via ReceiveAndDelete mode.

Parameters: action (str) – The settlement operation, there are four types of settlement, complete/abandon/defer/dead_letter.

raise_with_traceback()¶

with_traceback()¶: Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

args¶

exception azure.servicebus.exceptions.MessageContentTooLarge(message, *args, **kwargs)[source]¶

Message content is larger than the service bus frame size.

raise_with_traceback()¶

with_traceback()¶: Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

args¶

exception azure.servicebus.exceptions.MessageLockExpired(message: Optional[str] = None, error: Optional[Exception] = None)[source]¶

The lock on the message has expired and it has been released back to the queue.

It will need to be received again in order to settle it.

raise_with_traceback()¶

with_traceback()¶: Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

args¶

exception azure.servicebus.exceptions.MessageSendFailed(error: Exception)[source]¶

A message failed to send to the Service Bus entity.

raise_with_traceback()¶

with_traceback()¶: Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

args¶

exception azure.servicebus.exceptions.MessageSettleFailed(action: str, error: Exception)[source]¶

Attempt to settle a message failed.

Parameters

action (str) – The settlement operation, there are four types of settlement, complete/abandon/defer/dead_letter.
error (Exception) – The original exception if any.

raise_with_traceback()¶

with_traceback()¶: Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

args¶

exception azure.servicebus.exceptions.NoActiveSession(message, *args, **kwargs)[source]¶

No active Sessions are available to receive from.

raise_with_traceback()¶

with_traceback()¶: Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

args¶

exception azure.servicebus.exceptions.OperationTimeoutError(message, *args, **kwargs)[source]¶

Operation timed out.

raise_with_traceback()¶

with_traceback()¶: Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

args¶

exception azure.servicebus.exceptions.ServiceBusAuthenticationError(message, *args, **kwargs)[source]¶

An error occurred when authenticate the connection.

raise_with_traceback()¶

with_traceback()¶: Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

args¶

exception azure.servicebus.exceptions.ServiceBusAuthorizationError(message, *args, **kwargs)[source]¶

An error occurred when authorizing the connection.

raise_with_traceback()¶

with_traceback()¶: Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

args¶

exception azure.servicebus.exceptions.ServiceBusConnectionError(message, *args, **kwargs)[source]¶

An error occurred in the connection.

raise_with_traceback()¶

with_traceback()¶: Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

args¶

exception azure.servicebus.exceptions.ServiceBusError(message, *args, **kwargs)[source]¶

Base exception for all Service Bus errors which can be used for default error handling.

Parameters

message (str) – The message object stringified as ‘message’ attribute

Keyword Arguments

error (Exception) – The original exception if any

Variables

exc_type – The exc_type from sys.exc_info()
exc_value – The exc_value from sys.exc_info()
exc_traceback – The exc_traceback from sys.exc_info()
exc_msg – A string formatting of message parameter, exc_type and exc_value
message (str) – A stringified version of the message parameter

raise_with_traceback()¶

with_traceback()¶: Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

args¶

exception azure.servicebus.exceptions.ServiceBusMessageError(message, *args, **kwargs)[source]¶

An error occurred when an operation on a message failed because the message is in an incorrect state.

raise_with_traceback()¶

with_traceback()¶: Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

args¶

exception azure.servicebus.exceptions.SessionLockExpired(message: Optional[str] = None, error: Optional[Exception] = None)[source]¶

The lock on the session has expired.

All unsettled messages that have been received can no longer be settled.

raise_with_traceback()¶

with_traceback()¶: Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

args¶